Molded Seals and Clip Installation Instructions

CAUTION! CLIPS CANNOT BE REMOVED without damaging the weatherstripping once they are installed. CHECK PARTS CAREFULLY BEFORE INSTALLING. They are marked “Left” or “Right”, “Rear” on molded end.

These seals are made with more detail and duplicate the factory look and feel, unlike other brands. Drivers Door LM 13-V, Left Rear Cargo Doors LM 13-VR, Right and Left (Glue here — as shown in illustration) Side Doors Short and Long • Cargo Swing-Open Type, LM 13-VC, Right and Left • Slider...

IMPORTANT! Please follow instructions carefully. Four clips are packaged with your new set of Molded Door Seals. Because of slight variations, we’ve found that between the years 1966-1967, proper fit of the molded ends of these door seals has to be done at the time of installation. The molded ...

IMPORTANT! Please follow these instructions carefully. BEFORE INSTALLATION: Check carefully to make sure all pins are lined up with the proper holes before inserting ANY pins in door holes. CAUTION: If weatherstripping with pins is removed, rubber near pins may be torn. If tears occur, Crazy g...